Bolt lapping
|
Bolt lapping
|
02-13-2014, 02:33 AM
I took two Dremel tool buffing pads and glued them together, "one on top of the other" and they fit perfectly in the bolt face. I used the red polishing compound that came with my Dremel kit. Make sure the bolts extractor and ejector are dissembled first. My bolt face came out like a mirror.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Bolt lapping - by 45r - 01-22-2014, 06:39 PM
Bolt lapping - by burkew23 - 01-22-2014, 08:08 PM
Bolt lapping - by NugginFutz - 01-23-2014, 03:29 AM
Bolt lapping - by LRRPF52 - 01-23-2014, 06:18 AM
Bolt lapping - by explorecaves - 01-23-2014, 02:22 PM
Bolt lapping - by LRRPF52 - 01-23-2014, 05:48 PM
Bolt lapping - by customcutter - 01-23-2014, 08:09 PM
Bolt lapping - by 45r - 01-26-2014, 05:18 AM
Bolt lapping - by jurassic - 01-26-2014, 02:12 PM
Bolt lapping - by customcutter - 01-26-2014, 03:02 PM
Bolt lapping - by jurassic - 01-26-2014, 03:29 PM
Bolt lapping - by LRRPF52 - 01-26-2014, 11:23 PM
Bolt lapping - by BjornF16 - 02-13-2014, 12:39 AM
Bolt lapping - by montana - 02-13-2014, 02:33 AM
Bolt lapping - by cst - 02-13-2014, 03:04 AM
Bolt lapping - by LRRPF52 - 02-13-2014, 03:09 AM
Bolt lapping - by BjornF16 - 02-13-2014, 03:17 AM
Bolt lapping - by LRRPF52 - 02-13-2014, 03:30 AM
Bolt lapping - by BjornF16 - 02-13-2014, 03:48 AM
Bolt lapping - by LRRPF52 - 02-13-2014, 03:58 AM
Bolt lapping - by cst - 02-13-2014, 09:13 AM
Bolt lapping - by Tedward - 02-13-2014, 09:33 AM
Bolt lapping - by LRRPF52 - 02-13-2014, 04:34 PM
|
