Motivated Moscow Match Redux

[Sticks]

90 grain TNT test here:

http://www.65grendel.com/forum/showthrea...der-charge

100 grain Nosler Partition here :

http://www.65grendel.com/forum/showthrea...der-charge

HuntTXhogs - Well done on your write-ups and results. I am going to link these to the first post on my MM threads.

Personally, anything less than .75 MOA would be a non starter for me, given that the rifle I am using will shoot sub MOA with BLACK or AG to begin with.

The hunt continues for a bullet that can be a straight Pull Push with no other work and get down to MOA or better. Not so concerned with velocity as long as it's accurate. If a velocity node is found with a sub 10 ES/SD on a straight PP, then start playing with COAL to tune the POI. Not many people are pushing the Grendel past 600 on a regular basis so the low weight class is not so much of an issue. For me, I have to be able make my 1.5 MOA target hits at 900. I need the heavies.

DNS has had awesome luck using the TNT, and your results would be something for a body looking at not having to hunt down the ejected brass, especially in the dark. I however will only allow "Lost Brass" at a range or shooting match if that be the case. .

I've read those Hunt, I was hoping to get some insight on the 107s.

Sticks, agreed. The .263 mandrel is definitely a good idea. The extra investments are making this more and more of an unworthy endeavor though, as prices and availability have regulated somewhat.

My last looking around showed that PPU was a thing again, not sure if is old recall stock that showed back up again, or if they are back. IIRC Wolf stated that they were increasing the dia. of their 100gr projectiles. Not sure if that has come through yet. Still, Wolf ammo shooting 2+ MOA is still a non starter for me as well. My doing all of this was because I bought 500 on top of another 200+ acquisition before I knew it was crap. Had to do something with it.

If Trump/Next POTUS/CorVi19 continues to be a media sensation panic thing and domestic ammo turns into another lesson in gouging or availability and Wolf was still an option and bullets were available, then I would do it again. $50+/- for a mandrel die is cheap if I am processing a 500 ct case of ammo to turn into sub MOA 123 ELD ammo.

This is also is an option if I want to push the limits on a bolt gun with a long throat and push 140s at 2600fps like Second. The steel case ought to handle the increased pressure a bit better as long as it's not splitting and plasma cutting the chamber neck and throat area.