02-06-2014, 01:10 AM
arnie Wrote:If im reading the measurements right ,the throat goes from .2644 down to .2617 ?? That's not possible or you would be swaging a .264 bullet down to .261 before it enters a barrel that's groove diameter should be .264 .
Arnie,
The bore is .264", but the lands are .256".
So the lands are being trimmed at 1.5 degree angle to the diameter that is less than .264".
LIFE member: NRA, TSRA, SAF, GOA
Defend the Constitution and our 2A Rights!
Defend the Constitution and our 2A Rights!

