02-01-2014, 09:53 PM
Got the kit directly from Satern.
I colored a couple of 123gr SSTs with a dry erase marker and inserted them by had. After the extractor snapped on they did require a little push to get the bolt to lock. They also required a tug to get out. The normal operation of the bolt being pushed with the buffer spring would be enough to overcome the force to push the bullets into the barrel. Notice the marks circled in green. Both measured 2.248 before and after inserting them.
![[Image: 4vct.jpg]](http://imageshack.com/a/img835/8531/4vct.jpg)
Measured brand new Hornady 53gr Vmax and 150gr FMJ/BT. Calipers measured .224 and .308.
![[Image: z27t.JPG]](http://imageshack.com/a/img38/9178/z27t.JPG)
![[Image: x9ea.jpg]](http://imageshack.com/a/img547/4149/x9ea.jpg)
I colored a couple of 123gr SSTs with a dry erase marker and inserted them by had. After the extractor snapped on they did require a little push to get the bolt to lock. They also required a tug to get out. The normal operation of the bolt being pushed with the buffer spring would be enough to overcome the force to push the bullets into the barrel. Notice the marks circled in green. Both measured 2.248 before and after inserting them.
Measured brand new Hornady 53gr Vmax and 150gr FMJ/BT. Calipers measured .224 and .308.