6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Ammunition & Reloading v
Bullet Seating Depth

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Bullet Seating Depth
LRRPF52
Unregistered
 
#33
01-27-2014, 01:30 AM
The dimensions that AA uses is .136" -.003" allowable, not any deeper than .136". What method did you use to measure your depth?

I use the slide from my calipers as a protrusion gauge. Some machinists could chime in with a better method, but this is what I have available, and gives me readings that make sense on both Grendel and 5.56 bolts:

[Image: 2012-09-20121126_zps71414dd5.jpg]
Reply


Messages In This Thread
Bullet Seating Depth - by frittsk - 12-11-2013, 01:12 AM
Bullet Seating Depth - by tackdriver - 12-11-2013, 01:16 AM
Bullet Seating Depth - by frittsk - 12-11-2013, 01:18 AM
Bullet Seating Depth - by tackdriver - 12-11-2013, 01:56 AM
Bullet Seating Depth - by frittsk - 12-11-2013, 02:11 AM
Bullet Seating Depth - by tackdriver - 12-11-2013, 02:18 AM
Bullet Seating Depth - by Klem - 12-11-2013, 02:36 AM
Bullet Seating Depth - by NugginFutz - 12-11-2013, 02:37 AM
Bullet Seating Depth - by Klem - 12-11-2013, 02:46 AM
Bullet Seating Depth - by frittsk - 12-11-2013, 03:02 AM
Bullet Seating Depth - by frittsk - 12-11-2013, 03:07 AM
Bullet Seating Depth - by Klem - 12-11-2013, 03:27 AM
Bullet Seating Depth - by NugginFutz - 12-11-2013, 03:51 AM
Bullet Seating Depth - by seatleroadwr - 12-11-2013, 04:05 AM
Bullet Seating Depth - by Klem - 12-11-2013, 11:26 AM
Bullet Seating Depth - by LRRPF52 - 12-11-2013, 06:17 PM
Bullet Seating Depth - by LR1955 - 12-11-2013, 07:25 PM
Bullet Seating Depth - by frittsk - 12-14-2013, 07:30 PM
Bullet Seating Depth - by LRRPF52 - 12-15-2013, 06:02 AM
Bullet Seating Depth - by frittsk - 12-15-2013, 05:51 PM
Bullet Seating Depth - by frittsk - 01-01-2014, 05:13 PM
Bullet Seating Depth - by Blute308 - 01-04-2014, 03:41 AM
Bullet Seating Depth - by LRRPF52 - 01-04-2014, 03:50 AM
Bullet Seating Depth - by Blute308 - 01-05-2014, 03:11 AM
Bullet Seating Depth - by frittsk - 01-05-2014, 09:55 PM
Bullet Seating Depth - by frittsk - 01-24-2014, 02:36 AM
Bullet Seating Depth - by rabiddawg - 01-24-2014, 05:00 PM
Bullet Seating Depth - by frittsk - 01-25-2014, 01:10 AM
Bullet Seating Depth - by frittsk - 01-26-2014, 11:21 PM
Bullet Seating Depth - by frittsk - 01-26-2014, 11:23 PM
Bullet Seating Depth - by LRRPF52 - 01-26-2014, 11:31 PM
Bullet Seating Depth - by frittsk - 01-27-2014, 01:19 AM
Bullet Seating Depth - by LRRPF52 - 01-27-2014, 01:30 AM
Bullet Seating Depth - by frittsk - 01-27-2014, 01:35 AM
Bullet Seating Depth - by LRRPF52 - 01-27-2014, 01:51 AM
Bullet Seating Depth - by WildBill3/75 - 01-27-2014, 02:05 AM
Bullet Seating Depth - by 2ndAmendment - 01-27-2014, 03:57 AM
Bullet Seating Depth - by NugginFutz - 01-27-2014, 04:30 AM
Bullet Seating Depth - by 2ndAmendment - 01-27-2014, 10:25 PM
Bullet Seating Depth - by customcutter - 01-27-2014, 11:15 PM
Bullet Seating Depth - by frittsk - 01-28-2014, 01:28 AM
Bullet Seating Depth - by frittsk - 02-11-2014, 12:01 AM
Bullet Seating Depth - by LRRPF52 - 02-11-2014, 12:17 AM
Bullet Seating Depth - by frittsk - 02-11-2014, 01:40 AM
Bullet Seating Depth - by warthog - 02-11-2014, 05:36 PM
Bullet Seating Depth - by 45r - 02-11-2014, 06:01 PM
Bullet Seating Depth - by JASmith - 02-11-2014, 08:18 PM
Bullet Seating Depth - by frittsk - 02-13-2014, 11:00 PM
Bullet Seating Depth - by JASmith - 02-13-2014, 11:14 PM
Bullet Seating Depth - by frittsk - 02-13-2014, 11:51 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)