6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel ARs and Other Semi-Autos v
Squaring & Lapping the Upper Face

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Squaring & Lapping the Upper Face
customcutter
Unregistered
 
#29
01-18-2014, 05:47 PM
So it looks like 1.000 +/-.002 for the upper tolerances, and .9987 Dia -.0004 minimal tolerance would be .9983" on the extension if I'm reading the "fuzzy" print correctly, which is .0003 larger than min spec on the upper???
Reply


Messages In This Thread
Squaring & Lapping the Upper Face - by MikeGideon - 01-16-2014, 03:57 PM
Squaring & Lapping the Upper Face - by NugginFutz - 01-16-2014, 05:06 PM
Squaring & Lapping the Upper Face - by Tedward - 01-16-2014, 05:42 PM
Squaring & Lapping the Upper Face - by NugginFutz - 01-16-2014, 05:56 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-17-2014, 01:57 AM
Squaring & Lapping the Upper Face - by GMinor - 01-17-2014, 04:14 AM
Squaring & Lapping the Upper Face - by GMinor - 01-17-2014, 04:15 AM
Squaring & Lapping the Upper Face - by NugginFutz - 01-17-2014, 04:25 AM
Squaring & Lapping the Upper Face - by Tedward - 01-17-2014, 04:36 AM
Squaring & Lapping the Upper Face - by GMinor - 01-17-2014, 04:36 AM
Squaring & Lapping the Upper Face - by Tedward - 01-17-2014, 04:40 AM
Squaring & Lapping the Upper Face - by NugginFutz - 01-17-2014, 05:40 AM
Squaring & Lapping the Upper Face - by montana - 01-17-2014, 05:46 AM
Squaring & Lapping the Upper Face - by explorecaves - 01-17-2014, 01:12 PM
Squaring & Lapping the Upper Face - by customcutter - 01-17-2014, 01:47 PM
Squaring & Lapping the Upper Face - by Tedward - 01-17-2014, 02:04 PM
Squaring & Lapping the Upper Face - by Tedward - 01-17-2014, 02:11 PM
Squaring & Lapping the Upper Face - by Tedward - 01-17-2014, 03:54 PM
Squaring & Lapping the Upper Face - by NugginFutz - 01-17-2014, 04:59 PM
Squaring & Lapping the Upper Face - by customcutter - 01-17-2014, 08:02 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-17-2014, 10:06 PM
Squaring & Lapping the Upper Face - by explorecaves - 01-18-2014, 04:15 PM
Squaring & Lapping the Upper Face - by customcutter - 01-18-2014, 05:47 PM
Squaring & Lapping the Upper Face - by NugginFutz - 01-18-2014, 08:44 PM
Squaring & Lapping the Upper Face - by customcutter - 01-18-2014, 11:01 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-20-2014, 03:02 PM
Squaring & Lapping the Upper Face - by customcutter - 01-20-2014, 07:50 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-20-2014, 08:35 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-21-2014, 03:54 PM
Squaring & Lapping the Upper Face - by jurassic - 01-21-2014, 04:58 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-21-2014, 06:05 PM
Squaring & Lapping the Upper Face - by waveslayer - 01-21-2014, 08:59 PM
Squaring & Lapping the Upper Face - by explorecaves - 01-22-2014, 01:42 PM
Squaring & Lapping the Upper Face - by Tedward - 01-22-2014, 01:59 PM
Squaring & Lapping the Upper Face - by GMinor - 01-22-2014, 05:22 PM
Squaring & Lapping the Upper Face - by MikeGideon - 01-22-2014, 07:04 PM
Squaring & Lapping the Upper Face - by waveslayer - 01-22-2014, 09:53 PM
Squaring & Lapping the Upper Face - by waveslayer - 01-22-2014, 09:55 PM
Squaring & Lapping the Upper Face - by BjornF16 - 01-23-2014, 02:01 AM
Squaring & Lapping the Upper Face - by customcutter - 01-23-2014, 07:54 PM
Squaring & Lapping the Upper Face - by bigbear_98 - 01-16-2014, 03:20 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)