01-02-2014, 06:15 PM
Keep The Change Wrote:I never took apart the FS2000 trigger group but yeah I agree that the hammer is now a long way away from the trigger. I can understand heaviness but the creep was bad as well. I can understand that as well being you have longer train of mechanisms. But it seems like it could definitley be smoother.
However, a bull pup is designed for CQB and trigger action is not that critical like it is when making a 200-300 yd shot and you aren't expected to take many of those shots in CQB and even if it makes it way outside a structure.
I tried one of the Neu-Trigger things in my FS2000. It did smooth up the feel. The pull may be a little lighter, I did not measure it. I coated the Neu-Trigger part and the factory hammer with Sentry Solutions dry lube, also. Over all for the few $ it costs there
was a noticeable improvement in the trigger action. As was said, this is really a CQB rifle and you need to just pull through the trigger not get fancy trying to stage it. In some load testing I shot several .75" groups with some 75gr match bullet loads, so the rifle will get the job done close or far, if you give it a chance.