What now???
|
What now???
|
|
12-04-2013, 03:49 AM
With the wider PPC-based cases, and the angle that the case head is at when it hands-off from the feed lips, the edge of the case can get hung-up on a flat-headed ejector. The Hornady brass has a nice chamfer to it that feeds best, but the other cases are a little more prone to getting stuck on the side of the ejector. By radiusing it, you solve that potential problem.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
What now??? - by customcutter - 12-04-2013, 12:34 AM
What now??? - by Tedward - 12-04-2013, 01:11 AM
What now??? - by LRRPF52 - 12-04-2013, 01:22 AM
What now??? - by customcutter - 12-04-2013, 01:49 AM
What now??? - by customcutter - 12-04-2013, 02:05 AM
What now??? - by explorecaves - 12-04-2013, 02:13 AM
What now??? - by customcutter - 12-04-2013, 02:27 AM
What now??? - by LRRPF52 - 12-04-2013, 02:28 AM
What now??? - by Tedward - 12-04-2013, 02:36 AM
What now??? - by customcutter - 12-04-2013, 03:06 AM
What now??? - by LRRPF52 - 12-04-2013, 03:49 AM
What now??? - by hydrotech - 12-04-2013, 04:15 AM
What now??? - by Tedward - 12-04-2013, 01:09 PM
What now??? - by kg4kpg - 12-04-2013, 04:11 PM
What now??? - by FlatsFlite - 12-04-2013, 05:53 PM
What now??? - by LRRPF52 - 12-04-2013, 05:56 PM
What now??? - by hydrotech - 12-04-2013, 05:56 PM
What now??? - by MrFrankZ - 12-04-2013, 07:13 PM
What now??? - by hydrotech - 12-04-2013, 07:22 PM
What now??? - by Sojorboy - 12-04-2013, 07:39 PM
What now??? - by hydrotech - 12-04-2013, 08:11 PM
What now??? - by MrFrankZ - 12-04-2013, 10:01 PM
What now??? - by Sojorboy - 12-04-2013, 10:36 PM
What now??? - by Tedward - 12-04-2013, 10:45 PM
What now??? - by MrFrankZ - 12-04-2013, 11:27 PM
What now??? - by MrFrankZ - 12-04-2013, 11:28 PM
What now??? - by Tedward - 12-04-2013, 11:31 PM
What now??? - by MrFrankZ - 12-05-2013, 12:37 AM
What now??? - by customcutter - 12-05-2013, 02:23 AM
|