11-16-2013, 12:14 AM
(This post was last modified: 11-16-2013, 12:29 AM by NugginFutz.)
I've got one in my .264 LBC from last November, and it works very well. These are not AK bolts, or hogged out 5.56 bolts, and seem to be of good quality. I also have an LBC bolt in my spares pouch, but it hasn't yet been called to service. Just be sure to get the appropriate bolt. Type II (most common) is recessed @ .135". If you know how your barrel is headspaced, you should be able to place the order whenever you are ready.
I am not sure what feedback you are referring to, but as far as broken lugs go, just keep your reloads below max pressures and your bolt should out last the barrel. Those within the horde who are keeping track of such things indicate that the overwhelming majority of brokenbolt-itis is directly related to hot load syndrome.
If you're not comfortable with them (no reason I can think of) you also have the option of going with Les Baer. See below:
http://www.65grendel.com/forum/showthrea...#post76782
I am not sure what feedback you are referring to, but as far as broken lugs go, just keep your reloads below max pressures and your bolt should out last the barrel. Those within the horde who are keeping track of such things indicate that the overwhelming majority of brokenbolt-itis is directly related to hot load syndrome.
If you're not comfortable with them (no reason I can think of) you also have the option of going with Les Baer. See below:
http://www.65grendel.com/forum/showthrea...#post76782