was bored at the range with a 6.5 grendel and a hacksaw!!!!

[LRRPF52]

I wonder if the critters will notice?

Interesting project. The bench rest guys did those tests with the 22 PPC, 6mm PPC, and .308 back in the day in Texas in a warehouse, and found that 21.75" was the most accurate barrel length for some reason across those calibers.

But no bit of information was, Virgil believes, more valuable than a little advice Jim Gilmore passed along. Jim said a barrel MUST be 21 3/4” long for optimum accuracy. That precise length, he stated, sets up a vibration pattern that duplicates well from shot to shot. Virgil faithfully followed that advice on his guns.

Anyone who strictly observes the 21 3/4" doctrine will screw off a failing barrel of that length and run a new one under it. Rechambering and rethreading, in order to achieve more pristine lands just forward of the throat, shortens the barrel. Shorten the barrel, spoil the magic length.

Through the years, the Houston Warehouse shooters were able to rate the relative accuracy of the various benchrest calibers — .22, 6mm and .30. In the perfect conditions of the warehouse, the .22’s outshot them all, followed closely by the 6mm’s. The .308 calibers were a not-too-distant third. The most accurate .30 caliber ever to find its way into the warehouse also belonged to Virgil. The rifle, built around a Shilen DGA action with McMillan barrel, shot consistently within a few thousandths of .100". The barrel length? You guessed it: 21 3/4".

http://www.angelfire.com/ma3/max357/houston.html