Torqued Barrel Nut
|
Torqued Barrel Nut
|
|
09-08-2013, 02:54 AM
I use and always have used (even Military weapons) Anti-Seize, It doesn't Bake off like greases and oils, It keeps the threads from galling and it has never been a problem taking it off later. I also agree with the back it off and try again approach, My last build was going the same way and I backed it off and re-torqued it and it lined up perfectly.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Torqued Barrel Nut - by Whelenon - 09-07-2013, 02:14 AM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 02:28 AM
Torqued Barrel Nut - by Tedward - 09-07-2013, 02:38 AM
Torqued Barrel Nut - by cory - 09-07-2013, 02:59 AM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 03:03 AM
Torqued Barrel Nut - by NugginFutz - 09-07-2013, 03:06 AM
Torqued Barrel Nut - by LRRPF52 - 09-07-2013, 03:28 AM
Torqued Barrel Nut - by kiwi 1 - 09-07-2013, 04:20 AM
Torqued Barrel Nut - by Kohoki - 09-07-2013, 11:21 AM
Torqued Barrel Nut - by kamrr4437 - 09-07-2013, 12:47 PM
Torqued Barrel Nut - by sneaky one - 09-07-2013, 01:10 PM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 01:30 PM
Torqued Barrel Nut - by Sojorboy - 09-07-2013, 01:31 PM
Torqued Barrel Nut - by Longshot_34 - 09-07-2013, 03:03 PM
Torqued Barrel Nut - by frank - 09-07-2013, 03:41 PM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 08:35 PM
Torqued Barrel Nut - by frank - 09-07-2013, 11:18 PM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 01:45 AM
Torqued Barrel Nut - by joker31 - 09-08-2013, 02:54 AM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 04:40 AM
|