Torqued Barrel Nut
|
Torqued Barrel Nut
|
|
09-07-2013, 08:35 PM
I backed if off to previous opening. For barrel nut/gas tube alignment it torqued at 35 ft.lb. IMO 35 ft.lb is too light, ya I know I've read 30-40 pounds is enough. I'd be more comfortable with 50-60 ft.lb. I'll get it out and see how it shoots. In the mean time I'm going to order a couple barrel nuts.
Very helpful, thanks guys, once again the Horde rules. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Torqued Barrel Nut - by Whelenon - 09-07-2013, 02:14 AM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 02:28 AM
Torqued Barrel Nut - by Tedward - 09-07-2013, 02:38 AM
Torqued Barrel Nut - by cory - 09-07-2013, 02:59 AM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 03:03 AM
Torqued Barrel Nut - by NugginFutz - 09-07-2013, 03:06 AM
Torqued Barrel Nut - by LRRPF52 - 09-07-2013, 03:28 AM
Torqued Barrel Nut - by kiwi 1 - 09-07-2013, 04:20 AM
Torqued Barrel Nut - by Kohoki - 09-07-2013, 11:21 AM
Torqued Barrel Nut - by kamrr4437 - 09-07-2013, 12:47 PM
Torqued Barrel Nut - by sneaky one - 09-07-2013, 01:10 PM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 01:30 PM
Torqued Barrel Nut - by Sojorboy - 09-07-2013, 01:31 PM
Torqued Barrel Nut - by Longshot_34 - 09-07-2013, 03:03 PM
Torqued Barrel Nut - by frank - 09-07-2013, 03:41 PM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 08:35 PM
Torqued Barrel Nut - by frank - 09-07-2013, 11:18 PM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 01:45 AM
Torqued Barrel Nut - by joker31 - 09-08-2013, 02:54 AM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 04:40 AM
|