6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Build-It-Yourself & Custom Builds v
Torqued Barrel Nut

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Torqued Barrel Nut
frank
Unregistered
 
#15
09-07-2013, 03:41 PM
Torque the nut to 40 three times. On the third time line it up on the first opening past 40. If you get to 80 without it lining up, I'd take it completely off and try again. If you get the same results, try a different barrel nut.
Reply


Messages In This Thread
Torqued Barrel Nut - by Whelenon - 09-07-2013, 02:14 AM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 02:28 AM
Torqued Barrel Nut - by Tedward - 09-07-2013, 02:38 AM
Torqued Barrel Nut - by cory - 09-07-2013, 02:59 AM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 03:03 AM
Torqued Barrel Nut - by NugginFutz - 09-07-2013, 03:06 AM
Torqued Barrel Nut - by LRRPF52 - 09-07-2013, 03:28 AM
Torqued Barrel Nut - by kiwi 1 - 09-07-2013, 04:20 AM
Torqued Barrel Nut - by Kohoki - 09-07-2013, 11:21 AM
Torqued Barrel Nut - by kamrr4437 - 09-07-2013, 12:47 PM
Torqued Barrel Nut - by sneaky one - 09-07-2013, 01:10 PM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 01:30 PM
Torqued Barrel Nut - by Sojorboy - 09-07-2013, 01:31 PM
Torqued Barrel Nut - by Longshot_34 - 09-07-2013, 03:03 PM
Torqued Barrel Nut - by frank - 09-07-2013, 03:41 PM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 08:35 PM
Torqued Barrel Nut - by frank - 09-07-2013, 11:18 PM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 01:45 AM
Torqued Barrel Nut - by joker31 - 09-08-2013, 02:54 AM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 04:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)