6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Build-It-Yourself & Custom Builds v
Torqued Barrel Nut

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Torqued Barrel Nut
Sojorboy Offline
Senior Member
****
Posts: 252
Threads: 28
Joined: Nov 2011
#13
09-07-2013, 01:31 PM
I would back it up and line it up with the previous hole. I had a friend try to go to the next hole after 60 lbs, ended up busting the nut and damaging the threads on the receiver. Be very careful, good luck
Find
Reply


Messages In This Thread
Torqued Barrel Nut - by Whelenon - 09-07-2013, 02:14 AM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 02:28 AM
Torqued Barrel Nut - by Tedward - 09-07-2013, 02:38 AM
Torqued Barrel Nut - by cory - 09-07-2013, 02:59 AM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 03:03 AM
Torqued Barrel Nut - by NugginFutz - 09-07-2013, 03:06 AM
Torqued Barrel Nut - by LRRPF52 - 09-07-2013, 03:28 AM
Torqued Barrel Nut - by kiwi 1 - 09-07-2013, 04:20 AM
Torqued Barrel Nut - by Kohoki - 09-07-2013, 11:21 AM
Torqued Barrel Nut - by kamrr4437 - 09-07-2013, 12:47 PM
Torqued Barrel Nut - by sneaky one - 09-07-2013, 01:10 PM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 01:30 PM
Torqued Barrel Nut - by Sojorboy - 09-07-2013, 01:31 PM
Torqued Barrel Nut - by Longshot_34 - 09-07-2013, 03:03 PM
Torqued Barrel Nut - by frank - 09-07-2013, 03:41 PM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 08:35 PM
Torqued Barrel Nut - by frank - 09-07-2013, 11:18 PM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 01:45 AM
Torqued Barrel Nut - by joker31 - 09-08-2013, 02:54 AM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 04:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)