6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Build-It-Yourself & Custom Builds v
Torqued Barrel Nut

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Torqued Barrel Nut
Whelenon
Unregistered
 
#1
09-07-2013, 02:14 AM
OK, I torqued the barrel nut to 80 ft.lb. and it's 1/2 way between tabs.

[Image: barrelassy004_zpsb6494b38.jpg]

Now what?

Also, assembly lube, what's the reason not to used the lube w/moly-graphite?
Reply


Messages In This Thread
Torqued Barrel Nut - by Whelenon - 09-07-2013, 02:14 AM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 02:28 AM
Torqued Barrel Nut - by Tedward - 09-07-2013, 02:38 AM
Torqued Barrel Nut - by cory - 09-07-2013, 02:59 AM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 03:03 AM
Torqued Barrel Nut - by NugginFutz - 09-07-2013, 03:06 AM
Torqued Barrel Nut - by LRRPF52 - 09-07-2013, 03:28 AM
Torqued Barrel Nut - by kiwi 1 - 09-07-2013, 04:20 AM
Torqued Barrel Nut - by Kohoki - 09-07-2013, 11:21 AM
Torqued Barrel Nut - by kamrr4437 - 09-07-2013, 12:47 PM
Torqued Barrel Nut - by sneaky one - 09-07-2013, 01:10 PM
Torqued Barrel Nut - by dmsims21 - 09-07-2013, 01:30 PM
Torqued Barrel Nut - by Sojorboy - 09-07-2013, 01:31 PM
Torqued Barrel Nut - by Longshot_34 - 09-07-2013, 03:03 PM
Torqued Barrel Nut - by frank - 09-07-2013, 03:41 PM
Torqued Barrel Nut - by Whelenon - 09-07-2013, 08:35 PM
Torqued Barrel Nut - by frank - 09-07-2013, 11:18 PM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 01:45 AM
Torqued Barrel Nut - by joker31 - 09-08-2013, 02:54 AM
Torqued Barrel Nut - by Whelenon - 09-08-2013, 04:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)