Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Satern 18" 6.5/G
#5
My 24 inch Satern Barrel shoots 1/2 MOA with preliminary loads with 120 grain TTSX and leverEvolution, at worst. That is the same at least as the 120 Grain Wolf, so I 'm sure it can be improved. I've also got a 16 inch lightweight double fluted Satern that has the flash hider integral to the barrel, so it really has only 14 inches of rifled barrel and the rest is flash hider, I'm still working on that, but have the rifle finished. I've got a 20 inch heavy duty barrel that I haven't married to an upper yet, but I bought it because I'm so happy with the first two. I plan to convert the two longer barrels to gas piston, because they are so accurate to start with. Too bad to lose the cut rifled barrel company. Here is the pic of the 16 on the VLTOR one piece upper.
Reply


Messages In This Thread
Satern 18" 6.5/G - by maxscm - 07-07-2011, 12:43 AM
Satern 18" 6.5/G - by maxscm - 07-14-2011, 01:48 AM
Satern 18" 6.5/G - by JohnOD - 07-14-2011, 03:16 AM
Satern 18" 6.5/G - by warped - 07-14-2011, 03:28 AM
Satern 18" 6.5/G - by fanofflyn - 07-14-2011, 04:21 AM
Satern 18" 6.5/G - by jwilson1985 - 07-14-2011, 07:12 AM
Satern 18" 6.5/G - by Malchira - 07-14-2011, 11:51 AM
Satern 18" 6.5/G - by warped - 07-14-2011, 02:42 PM
Satern 18" 6.5/G - by JohnOD - 07-14-2011, 02:56 PM
Satern 18" 6.5/G - by warped - 07-14-2011, 03:41 PM
Satern 18" 6.5/G - by BluntForceTrauma - 07-14-2011, 03:45 PM
Satern 18" 6.5/G - by maxscm - 07-17-2011, 05:34 PM
Satern 18" 6.5/G - by wulfbabe - 07-28-2011, 06:48 PM
Satern 18" 6.5/G - by maxscm - 07-29-2011, 03:08 AM
Satern 18" 6.5/G - by z06man - 07-29-2011, 07:51 AM
Satern 18" 6.5/G - by WillD - 07-29-2011, 04:50 PM
Satern 18" 6.5/G - by WillD - 07-29-2011, 10:39 PM
Satern 18" 6.5/G - by WayneM - 08-02-2011, 09:40 AM
Satern 18" 6.5/G - by MrSurgicalPrecision - 08-02-2011, 05:29 PM
Satern 18" 6.5/G - by maxscm - 08-11-2011, 01:14 AM
Satern 18" 6.5/G - by PumpActionJackson - 08-11-2011, 02:02 AM
Satern 18" 6.5/G - by warped - 08-11-2011, 04:25 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)