6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Military & Law Enforcement v
How could or should the 6.5 mm Grendel be improved?

Linear Mode
How could or should the 6.5 mm Grendel be improved?
XcountryRider
Unregistered
 
#169
07-14-2013, 04:47 AM
woohoo Wrote:There will be plenty of those barrels when they get around to producing them, it will be this fall sometime. The 270 AR has a little more case capacity than a BRX, it is the same rim diameter and runs the same pressure so the bolt thrust will be the same. I've been shooting a 6 and 6.5BRX at near 60,000psi since 09 and have made a few hundred for customers. The lug attachment is very close to an AR10 bolt and these bolts are made from 9310 instead of 8620 like most 308 AR bolts. Gave you a link on the other forum.


Yeah saw that thanks.
Reply


Messages In This Thread
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 02-13-2013, 05:55 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-13-2013, 11:42 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-14-2013, 03:17 AM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 02-14-2013, 04:41 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-15-2013, 02:40 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-15-2013, 09:58 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 02-16-2013, 06:06 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-16-2013, 07:16 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-16-2013, 07:24 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-18-2013, 11:00 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-19-2013, 12:13 AM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-19-2013, 12:55 AM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 02-19-2013, 01:33 AM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-19-2013, 01:44 AM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 02-19-2013, 01:56 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-19-2013, 05:24 AM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 02-19-2013, 07:14 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 02-19-2013, 07:23 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-20-2013, 05:46 AM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 02-20-2013, 11:04 AM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-21-2013, 09:57 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-22-2013, 07:39 AM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-22-2013, 05:19 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-22-2013, 06:36 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 02-22-2013, 09:10 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-23-2013, 08:25 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-24-2013, 06:44 PM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 02-26-2013, 04:46 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 02-27-2013, 12:18 AM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 02-27-2013, 07:40 AM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-01-2013, 11:10 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-01-2013, 11:20 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-02-2013, 03:58 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-02-2013, 05:21 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-02-2013, 08:00 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-02-2013, 08:38 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-02-2013, 09:20 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-02-2013, 09:44 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-02-2013, 10:02 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 03-03-2013, 01:39 AM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-03-2013, 02:10 AM
How could or should the 6.5 mm Grendel be improved? - by adrenaline junkie - 03-03-2013, 03:48 AM
How could or should the 6.5 mm Grendel be improved? - by ricsmall - 03-03-2013, 04:42 AM
How could or should the 6.5 mm Grendel be improved? - by adrenaline junkie - 03-03-2013, 04:44 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 03-03-2013, 05:13 AM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-03-2013, 12:14 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-03-2013, 11:41 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-04-2013, 12:15 AM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-04-2013, 12:38 AM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-04-2013, 12:49 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 03-04-2013, 04:15 AM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-04-2013, 03:05 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-04-2013, 03:24 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-04-2013, 03:51 PM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-04-2013, 08:14 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-04-2013, 11:37 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 03-05-2013, 03:43 AM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 03-05-2013, 08:03 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 03-05-2013, 06:10 PM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-05-2013, 06:32 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-05-2013, 08:20 PM
How could or should the 6.5 mm Grendel be improved? - by Howitzer - 03-05-2013, 08:46 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 03-06-2013, 11:28 PM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 03-07-2013, 04:21 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-07-2013, 04:46 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 03-07-2013, 05:05 PM
How could or should the 6.5 mm Grendel be improved? - by Guardsman26 - 03-07-2013, 05:20 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-07-2013, 07:15 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-02-2013, 04:54 PM
How could or should the 6.5 mm Grendel be improved? - by Trooper - 07-02-2013, 06:46 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-03-2013, 01:38 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-03-2013, 01:40 PM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 07-04-2013, 03:12 AM
How could or should the 6.5 mm Grendel be improved? - by Bigfoot - 07-04-2013, 06:33 AM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-04-2013, 02:11 PM
How could or should the 6.5 mm Grendel be improved? - by noone - 07-07-2013, 10:24 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-07-2013, 11:17 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-08-2013, 01:03 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-08-2013, 01:59 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-08-2013, 03:29 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-08-2013, 04:15 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-08-2013, 06:53 PM
How could or should the 6.5 mm Grendel be improved? - by XcountryRider - 07-13-2013, 04:10 AM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-14-2013, 12:21 AM
How could or should the 6.5 mm Grendel be improved? - by XcountryRider - 07-14-2013, 04:47 AM
How could or should the 6.5 mm Grendel be improved? - by kamrr4437 - 07-14-2013, 10:07 PM
How could or should the 6.5 mm Grendel be improved? - by kamrr4437 - 07-21-2013, 02:19 AM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 07-21-2013, 06:48 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 07-21-2013, 11:34 PM
How could or should the 6.5 mm Grendel be improved? - by Tony Williams - 07-22-2013, 07:45 AM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 07-22-2013, 04:36 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-22-2013, 08:38 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 07-22-2013, 09:33 PM
How could or should the 6.5 mm Grendel be improved? - by LRRPF52 - 07-22-2013, 10:13 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-23-2013, 01:30 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-23-2013, 05:49 PM
How could or should the 6.5 mm Grendel be improved? - by woohoo - 07-23-2013, 06:38 PM
How could or should the 6.5 mm Grendel be improved? - by JASmith - 03-05-2013, 11:16 PM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-05-2013, 11:19 PM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-05-2013, 11:25 PM
How could or should the 6.5 mm Grendel be improved? - by Bill Alexander - 03-05-2013, 11:31 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)