6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Grendel Bolt not accepting Cam Pin

Linear Mode
Grendel Bolt not accepting Cam Pin
LRRPF52
Unregistered
 
#9
02-21-2013, 08:55 PM
Sounds like it was chromed as an after-thought. Can you please measure the bolt face depth and report that to us. You can use your calipers as a seating depth tool with the end that slides out of the scale body. Your dail will work just the same.
Reply


Messages In This Thread
Grendel Bolt not accepting Cam Pin - by Fillar - 02-20-2013, 07:33 PM
Grendel Bolt not accepting Cam Pin - by dukeboy_318 - 02-20-2013, 07:48 PM
Grendel Bolt not accepting Cam Pin - by Fillar - 02-20-2013, 07:57 PM
Grendel Bolt not accepting Cam Pin - by bwaites - 02-20-2013, 10:31 PM
Grendel Bolt not accepting Cam Pin - by Fillar - 02-21-2013, 12:33 AM
Grendel Bolt not accepting Cam Pin - by smoke13 - 02-21-2013, 02:56 AM
Grendel Bolt not accepting Cam Pin - by dukeboy_318 - 02-21-2013, 01:21 PM
Grendel Bolt not accepting Cam Pin - by Longshot_34 - 02-21-2013, 05:01 PM
Grendel Bolt not accepting Cam Pin - by LRRPF52 - 02-21-2013, 08:55 PM
Grendel Bolt not accepting Cam Pin - by Fillar - 02-21-2013, 09:44 PM
Grendel Bolt not accepting Cam Pin - by dukeboy_318 - 02-27-2013, 04:11 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)