02-21-2013, 02:56 AM
I bought a chrome bolt from satern as a replacement to the one that came with the barrel in 2011. It was a 7.62x39 bolt and the extractor was one of the modified .223 extractors to fit the .30 cal diameter but it had sharp edges that had to be deburred. I was not too overly impressed with it, but it functions.
I recommend you polish the diameter down on the cam pin until you have a nice fit on the bolt with a dremmel. I wouldn't risk messing up the bolt. You can replace the cam pin. To modify the hole on the bolt it would need to be reamed by a good machinist on an end mill, and it might require a special reamer diameter. Probably not a feasible option.
I recommend you polish the diameter down on the cam pin until you have a nice fit on the bolt with a dremmel. I wouldn't risk messing up the bolt. You can replace the cam pin. To modify the hole on the bolt it would need to be reamed by a good machinist on an end mill, and it might require a special reamer diameter. Probably not a feasible option.