12-01-2012, 07:23 AM
GregP42, Thank you!
I mainly use Hornady brass. I do have some Lapua brass, and when adding load info to the Chrony slips I note the loads using Lapua brass with "Lapua" or "L". The loads using Hornady brass usually get no note unless it is new brass and you may see "H" or "New H"
The program I used is Called OnTarget PC, it costs about $15 and I just recently discovered a free version "1.10" The TDS version is about $75 and has a few more features. I also use PointBlank Ballistics. Both programs do roughly the same thing But OnTarget is much easier to use quickly. PointBlank Ballistics is free with an option to donate.
And I also just realized that I didn't note these slips as the brass used was all new Hornady brass.
I mainly use Hornady brass. I do have some Lapua brass, and when adding load info to the Chrony slips I note the loads using Lapua brass with "Lapua" or "L". The loads using Hornady brass usually get no note unless it is new brass and you may see "H" or "New H"
The program I used is Called OnTarget PC, it costs about $15 and I just recently discovered a free version "1.10" The TDS version is about $75 and has a few more features. I also use PointBlank Ballistics. Both programs do roughly the same thing But OnTarget is much easier to use quickly. PointBlank Ballistics is free with an option to donate.
And I also just realized that I didn't note these slips as the brass used was all new Hornady brass.
