FTF issues with Liberty barrel using Wolf ammo

[Rawdeal]

Ok, it took me longer to get pics than I thought. I hope someone is still following this.

First, an explaination. I was able to repeat the malf by just cycling the action with the charging handle. In this regard, the bolt cycle was not violent enough to "smoosh" the bullet into the brass, but the effect of the malf is all the same.

Also, I looked at some brass fired from the gun, and there doesn't appear to be any issues with extractor marks or the like.

Now, about the pictures....

1. The malf occured regardless of what side of the mag the round was fed from. The picture below, shows where the malf has occured when the round was fed from the left side of the mag.

2. I tried using both AA magazines, and C-products, with the same result.

3. Ultimately, it doesnt appear as if the front of the round is being raised at all, prior to the bolt trying to carry it home to the chamber.

Are these pictures telling of any issues?