11-02-2012, 02:26 PM
Overwatcher Wrote:One of the biggest pitfalls to this caliber is the Magazine and feeding issues.
On the old site,there was a thread on proper magazine tuning with some dimension/pictures etc..
I'm astonished that we don't have one on the new site yet.
Also saw Bill A. mention that he tunes all his magazines he sells.
(Maybe he could give some pointers)
Just curious if anyone has pics/info/dimensions needed to get everyone on track with a magazine that is giving them a problem.
Lets get something going and make it a STICKY!
The list Begins,
BEFORE TWEAKING
1) If your not wanting to tune a magazine, AA has a higher QC and inspects all mags prior to shipping.No tuning is usually needed.
2) ASC took over C-Products reports are better quality.
3) AA does not sell the 17 rnd mags for a reason,there have always been flaws with the design.
4).....more comments..etc...
TWEAKING
...more to come...
Well I purchased 2 10 round mags from AA 3 months ago and the QC fail as far as I am concerned, both followers were in need of trimming off the excess plastic that had been left from the seams in the mold, neither follower would allow more than 3 rounds in before it would lock up and accept no more rounds
I ended up using a razor blade to trim off excess and since no problems
I don't call that tuning I call it very poor QC