10-31-2012, 12:10 AM
A round should not seat all the way in. If it does your firing pin will not make contact with the primer.
If a spent casing is not ejected and is slammed back into the chamber, it is possible that it will stick and be somewhat difficult to remove. Brass expands when fired. That's why it is necessary to re-size them before the next firing.
If a spent casing is not ejected and is slammed back into the chamber, it is possible that it will stick and be somewhat difficult to remove. Brass expands when fired. That's why it is necessary to re-size them before the next firing.