Stevens 200 bolt head mods for Grendel
#6
Hi again,
I was out at out range, for the monthly Field Rifle shoot and took the newly barrelled 200 Stevens 6.5 Grendel along to try.
Lapua cases, Sierra 120g HPBT's, ICI BR4 primers and 28g of ADI 2208. 6x42 Meopta scope in Tally mounts.
Barrel is a CrMo from TSE and is 25 3/4" (654mm) long #3 profile.
Wind gusting from left. Three sighters and five for the group. These were the first 8 shots fired from this barrel. Smile
[Image: P8050005.jpg]
[Image: P8050003.jpg]
[Image: P8050002.jpg]
Reply


Messages In This Thread
Stevens 200 bolt head mods for Grendel - by AFRO408 - 06-28-2012, 09:25 AM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 06-28-2012, 09:26 AM
Stevens 200 bolt head mods for Grendel - by LRRPF52 - 06-28-2012, 09:32 AM
Stevens 200 bolt head mods for Grendel - by ricsmall - 06-28-2012, 10:37 AM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 06-28-2012, 11:52 AM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-05-2012, 07:23 AM
Stevens 200 bolt head mods for Grendel - by adamjp - 08-05-2012, 09:23 AM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-05-2012, 12:09 PM
Stevens 200 bolt head mods for Grendel - by ricsmall - 08-05-2012, 12:54 PM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-05-2012, 10:08 PM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-05-2012, 10:12 PM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-05-2012, 10:15 PM
Stevens 200 bolt head mods for Grendel - by JASmith - 08-06-2012, 03:13 PM
Stevens 200 bolt head mods for Grendel - by eljefe - 08-07-2012, 01:50 PM
Stevens 200 bolt head mods for Grendel - by AFRO408 - 08-09-2012, 11:20 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)