07-16-2012, 02:42 PM
Take the upper off the lower. Take out the carrier/bolt and put it about where it would sit on top of the lower if it was together. Now push the carrier into the buffer so it goes into the tube as it would if you cycled it. Check to see if it binds in the tube. Work it up and down as you push it in and out. It should not bind or be tight.
Next take the buffer and spring out and do this again.
Check your spring and buffer to see if the buffer binds in the spring as it goes back all the way. The plastic piece on the back of the buffer shoud not be damaged.
let us know how how this works.
Greyfox
Next take the buffer and spring out and do this again.
Check your spring and buffer to see if the buffer binds in the spring as it goes back all the way. The plastic piece on the back of the buffer shoud not be damaged.
let us know how how this works.
Greyfox