BSA CF2 bolt rifle build.

[AFRO408]

Thanks Ric, LRROF52 & Tx,

I was worried about the ejector issue, but it works perfectly. Chucks loaded rounds out easily, so empties won't be a problem.

The dummy rounds in the pix, are loaded with 140g Taipan HP's and I don't have to seat them down into the case, because they have a long ogive and there is plenty of room in the mag. One advantage with a bolt gun, eh.

Test rounds. 140g Taipan HPx 25g ADI 2206H. 120g Sierra HPBT match x 28.5g 2208
COL is 2.340" for the Taipan and 2.285" for the Sierra.
The test rounds extracted easily and the, CCI BR4 primers, were flattened some.
I've loaded 5 of each for accuracy testing.
5 x 120g Sierra BTHP X 28G 2208
5 X 120g " " 28.5g 2208
5 x 140g Taipan HP x 24.5g BM2
5 x 140g " x 25g 2206H