06-26-2012, 10:31 AM
Hi fellas,
I'm building a bolt rifle for a customer and we found a nice slick BSA CF2 .222 for a donor. The barrel is shot out and the standard stock has a few marks, but otherwise is sound. It will get cleaned up along with everything else.
The 6.5 Grendel ctg fed from top of the unaltered mag, so there won't be much to do to get them to stack nicely.
After opening up the bolt face, I made a custom extractor for it. Case hardened and polished, it works perfectly.
![[Image: P6080002.jpg]](http://i568.photobucket.com/albums/ss122/243myra/gun%20pix/P6080002.jpg)
![[Image: P6260002.jpg]](http://i568.photobucket.com/albums/ss122/243myra/gun%20pix/P6260002.jpg)
The barrel got fitted today and the barrel channel in the stock was opened up, to accept the different profile.
![[Image: P6260004.jpg]](http://i568.photobucket.com/albums/ss122/243myra/gun%20pix/P6260004.jpg)
More pix to come as the job progresses.
I'm building a bolt rifle for a customer and we found a nice slick BSA CF2 .222 for a donor. The barrel is shot out and the standard stock has a few marks, but otherwise is sound. It will get cleaned up along with everything else.
The 6.5 Grendel ctg fed from top of the unaltered mag, so there won't be much to do to get them to stack nicely.
After opening up the bolt face, I made a custom extractor for it. Case hardened and polished, it works perfectly.
The barrel got fitted today and the barrel channel in the stock was opened up, to accept the different profile.
More pix to come as the job progresses.