6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Ejection Problem

Linear Mode
Ejection Problem
ricsmall
Unregistered
 
#15
01-26-2013, 06:00 PM
Bill Alexander Wrote:Stoner barrels are not sourced from Shaw.

The Grendel chamber is a SAAMI standard as is the ammunition. There will be some variability depending upon the reamer wear, but it is inside the tolerance envelope.

Manson usually has HSS reamers and for a project like this a solid pilot could be used. Unless you want to strip the upper you will need an extension handle. If the head space is correct use a stop reamer.


Oops! Sorry bout that. Read on the Internet so you know it's true!LOL.
Out of curiosity, where are they sourced from?
Reply


Messages In This Thread
Ejection Problem - by DW61 - 01-25-2013, 01:43 AM
Ejection Problem - by Drifter - 01-25-2013, 01:48 AM
Ejection Problem - by DW61 - 01-25-2013, 01:51 AM
Ejection Problem - by Drifter - 01-25-2013, 02:16 AM
Ejection Problem - by Taylormade - 01-25-2013, 02:21 AM
Ejection Problem - by DW61 - 01-25-2013, 02:37 AM
Ejection Problem - by davidj - 01-25-2013, 03:24 AM
Ejection Problem - by LRRPF52 - 01-25-2013, 06:14 AM
Ejection Problem - by DW61 - 01-25-2013, 11:09 PM
Ejection Problem - by Jcp73 - 01-26-2013, 12:09 AM
Ejection Problem - by LRRPF52 - 01-26-2013, 01:37 AM
Ejection Problem - by Jcp73 - 01-26-2013, 12:12 PM
Ejection Problem - by ricsmall - 01-26-2013, 02:16 PM
Ejection Problem - by Bill Alexander - 01-26-2013, 05:55 PM
Ejection Problem - by Bill Alexander - 01-26-2013, 06:21 PM
Ejection Problem - by Drifter - 01-26-2013, 06:27 PM
Ejection Problem - by LRRPF52 - 01-26-2013, 07:17 PM
Ejection Problem - by Hobster - 02-22-2013, 07:33 PM
Ejection Problem - by ricsmall - 01-26-2013, 06:00 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)