|
Feed problem
|
06-18-2012, 08:47 PM
You need to screw your die down more. You need to take the sized case and chamber it, see if you can close the bolt and if the case comes out easy. If not screw the die down some more and repeat the process. If the bullets are seated out too far you will also experience cartridges sticking in the chamber. Do a search on "Jump and Crimp" and you will see the method I use to measure OAL.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Feed problem - by Pbfreak199 - 06-01-2012, 11:27 PM
Feed problem - by VASCAR2 - 06-02-2012, 05:02 PM
Feed problem - by Pbfreak199 - 06-07-2012, 06:06 PM
Feed problem - by LRRPF52 - 06-07-2012, 10:52 PM
Feed problem - by Pbfreak199 - 06-18-2012, 07:34 PM
Feed problem - by rasp65 - 06-18-2012, 08:47 PM
Feed problem - by Drifter - 06-18-2012, 10:45 PM
Feed problem - by sneaky one - 06-19-2012, 01:55 AM
Feed problem - by Pbfreak199 - 06-19-2012, 05:26 AM
Feed problem - by Mutt - 06-22-2012, 02:34 AM
Feed problem - by txgunner00 - 06-22-2012, 03:23 PM
Feed problem - by sneaky one - 06-22-2012, 11:51 PM
Feed problem - by jkingrph - 08-05-2012, 11:41 PM
Feed problem - by Mav714 - 09-17-2012, 03:13 AM
|
