6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Failure to feed

Linear Mode
Failure to feed
txgunner00 Offline
Posting Freak
*****
Posts: 2,075
Threads: 35
Joined: Mar 2011
#18
05-16-2012, 01:53 PM
The deformations on the case head most likely are caused by too much pressure too early. It also could allow the primers to pop. As Variable said, try a heavier buffer. Hopefully that fixes it and it's not something like a tight bore with Saber being closed up.
Find
Reply


Messages In This Thread
Failure to feed - by georgio - 05-13-2012, 07:17 PM
Failure to feed - by txgunner00 - 05-13-2012, 07:32 PM
Failure to feed - by terrywick4 - 05-13-2012, 11:03 PM
Failure to feed - by georgio - 05-13-2012, 11:57 PM
Failure to feed - by georgio - 05-14-2012, 12:30 AM
Failure to feed - by txgunner00 - 05-14-2012, 02:10 AM
Failure to feed - by georgio - 05-14-2012, 04:42 PM
Failure to feed - by LRRPF52 - 05-14-2012, 06:29 PM
Failure to feed - by georgio - 05-15-2012, 01:11 PM
Failure to feed - by georgio - 05-15-2012, 01:19 PM
Failure to feed - by georgio - 05-15-2012, 09:46 PM
Failure to feed - by georgio - 05-15-2012, 09:49 PM
Failure to feed - by txgunner00 - 05-15-2012, 10:46 PM
Failure to feed - by Variable - 05-16-2012, 01:27 AM
Failure to feed - by georgio - 05-16-2012, 01:30 AM
Failure to feed - by Variable - 05-16-2012, 02:00 AM
Failure to feed - by LRRPF52 - 05-16-2012, 04:55 AM
Failure to feed - by txgunner00 - 05-16-2012, 01:53 PM
Failure to feed - by georgio - 05-17-2012, 01:29 PM
Failure to feed - by LRRPF52 - 05-17-2012, 05:21 PM
Failure to feed - by georgio - 05-19-2012, 02:51 PM
Failure to feed - by georgio - 05-19-2012, 02:55 PM
Failure to feed - by georgio - 05-19-2012, 02:58 PM
Failure to feed - by sneaky one - 05-20-2012, 02:22 PM
Failure to feed - by Tikka - 05-20-2012, 05:06 PM
Failure to feed - by georgio - 05-21-2012, 01:26 AM
Failure to feed - by sneaky one - 05-23-2012, 02:33 AM
Failure to feed - by georgio - 05-23-2012, 12:52 PM
Failure to feed - by sneaky one - 05-24-2012, 12:59 AM
Failure to feed - by georgio - 09-19-2012, 01:02 AM
Failure to feed - by georgio - 09-19-2012, 01:04 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)