05-07-2012, 10:56 PM
I played with the seating depth and crimping a little this weekend. Here's the info.
![[Image: SUB-SONICGrendelloads3.jpg]](http://i67.photobucket.com/albums/h302/jtdavis00/SUB-SONICGrendelloads3.jpg)
I seated as far back as the bullet would allow (2.160") without falling into the case. The bullets were instable and velocities erratic. Next I'll try pushing them out as far as the chamber will allow.
The crimping seemed to not affect accuracy or velocity much but made improved how well the non-fire formed brass formed to the chamber and they came out significantly cleaner. I'll post pics of the brass later.
I seated as far back as the bullet would allow (2.160") without falling into the case. The bullets were instable and velocities erratic. Next I'll try pushing them out as far as the chamber will allow.
The crimping seemed to not affect accuracy or velocity much but made improved how well the non-fire formed brass formed to the chamber and they came out significantly cleaner. I'll post pics of the brass later.