Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anyone actually see these issues with 6mm ARC?
#5
Aside from it looking like he's promoting/shilling his 6 max, IMO he gives away his real problem:

"Once I had developed my fundamentals, the idea that I could achieve more, faster, became attractive."

Seems to me he is a natural-born hot-rodder/push it to the max/ or over. Why not do it more, faster...??? BECAUSE YOU BREAK THINGS THAT'S WHY!!!!!

My bet is he's essentially trying to make his 6 Arc into a 6 Creedmoor.

I can say that, as mod on the 6 Arc forum, no one has reported or even suggested anything like a gas tube lock-up. Dino summed it up well.

The only gas tube (seeming) "failure" I had was actually a GB that slipped forward, blocking the port and causing leak-off back at the carrier key, and that was a 556. Not the gun's fault, but mine for not securing the GB set screws properly. Found, fixed, running great now.


Edit to add: another guess, but I'll bet he also is falling prey to the "look for swipes, if none then you can push it faster" crowd, basically ignoring that as a mid-pressure cartridge, the typical over-pressure signs for the grendel or 6 Arc are way above Saami max. He didn't "see" any swipes so must not be at or above max pressure yet... not a good way to treat your equipment. My first Eng when in the Nav (nukes by the way) wrote and stressed in his Eng standing orders book, never to stress/over-stress equipment, ie, unless the Russians are shooting at you sort of thing. Stuck with me ever since. Especially b/c more than once, the russkies were in our neighborhood and quiet was much better than fast.
"Down the floor, out the door, Go Brandon Go!!!!!"
Reply


Messages In This Thread
Anyone actually see these issues with 6mm ARC? - by grayfox - 11-03-2023, 01:39 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)