10-24-2023, 10:38 AM
Old Bob Wrote:My mini's action didn't line up in its stock either. When the action screws were tightened down, the barrel was touching the left side of the barrel channel. It came with the polymer stock. I replaced the stock with the one from Oregunsmithing. I replaced the bottom metal with Jefferson Outdoor's hinged floorplate version.Mine too, but it was a walnut stock, and when I tightened down the action screws it deformed the mag well enough that the mags wouldn't slide in right.
[ATTACH=CONFIG]19999[/ATTACH] [ATTACH=CONFIG]20000[/ATTACH]