09-22-2023, 01:09 AM
Thanks for the input so far guys.
Bit more detail on my end; I have been using once fired hornady brass, bushing neck sized .287 for both the bullets in question. I will revist Lever for the 130gr Otm, perhaps it will bring down the ES numbers from what i am seeing in with CFE. Ran a ladder test with cfe and the 123eldm and never came in to an accuracy node that was where i expected it should be.
The Otm and eld both are over 2.23" coal before they hit the lands in this grendel II chamber(brownells/saturn?). I can load out to 2.9" when i use a duramag.
Gun shoots other combos(lighter bullets with 8208xbr) as small as .25" at 100yards, so i dont believe any inherent inaccuracy is taking place(in regards to the 123eldm.)
Bit more detail on my end; I have been using once fired hornady brass, bushing neck sized .287 for both the bullets in question. I will revist Lever for the 130gr Otm, perhaps it will bring down the ES numbers from what i am seeing in with CFE. Ran a ladder test with cfe and the 123eldm and never came in to an accuracy node that was where i expected it should be.
The Otm and eld both are over 2.23" coal before they hit the lands in this grendel II chamber(brownells/saturn?). I can load out to 2.9" when i use a duramag.
Gun shoots other combos(lighter bullets with 8208xbr) as small as .25" at 100yards, so i dont believe any inherent inaccuracy is taking place(in regards to the 123eldm.)