130gr berger otm hybrid = 30.3gr of leverevolution 2.285 COAL. Starline brass + cci #41. This gives me single digit SD and ES around 15-20.
I have never had ES of 100 using lever... ever. not on any bullet in any case with any primer. Tell us about your reloading setup, specifically sizing die setup, and powder measure/scale. something seems off and to me its not the rifle. it could be as simple as the chronograph is being insane also.
also... 28.5gr of 8208xbr + 123gr ELDM loaded at 2.26" COAL = over pressure and not by a little. i wouldnt load this high with xbr and a 123gr, and i load pretty hot some/most times. 28.2 is pushing it and is known to be the bolt breaker load with 123s.
I have never had ES of 100 using lever... ever. not on any bullet in any case with any primer. Tell us about your reloading setup, specifically sizing die setup, and powder measure/scale. something seems off and to me its not the rifle. it could be as simple as the chronograph is being insane also.
also... 28.5gr of 8208xbr + 123gr ELDM loaded at 2.26" COAL = over pressure and not by a little. i wouldnt load this high with xbr and a 123gr, and i load pretty hot some/most times. 28.2 is pushing it and is known to be the bolt breaker load with 123s.