08-15-2023, 03:03 PM
Head space, function and depth gauges saves a lot of headache..
Be sure to check the case moves freely in and out of the bolt face and the ejector pushes completely flush..
Normally I would say light hammer spring/out of spec bolt-firing pin, out of spec gas tube interface with gas key, etc, but I think the others could be right about a chamber problem..
Be sure to check the case moves freely in and out of the bolt face and the ejector pushes completely flush..
Normally I would say light hammer spring/out of spec bolt-firing pin, out of spec gas tube interface with gas key, etc, but I think the others could be right about a chamber problem..