Well ended up with a 6 AR not an ARC

[rickt300]

Got a great deal on it, came with some ammo and brass. My rifle's twin is for sale on the Texas hunting forum. I pulled the 6x SWFA SS Milquad off my Grendel, just happened to have a Keymod bipod mount and a good bipod for it. Cleaned the action and bolt then lubed it down. Doesn't look to be fired much but I ran 8 rounds through it. Reloads from the previous owner who I trust. At any rate the load, 28.5 grains of ARComp in a Starline Grendel case necked down to 6mm under a 90 grain Accubond and popped with a CCI #41 primer. First four were to get it on paper and at a hundred yards I had to give it 2 clicks right to get it centered. Last three shots just under 3/4ths of an inch. My only snivel is that load development was too easy! Actually I have plans to test the 58 gr. VMax and the 55 gr. Ballistic tips just because and a number of other bullets mostly pushed with BLC2 because I have plenty of it.