06-04-2023, 05:38 PM
Lots of info over on the 6mm ARC forum...
I use The ASC and duramags too, 3 Arc's. Only slight mod I've done is to lower the front lip by about (IIRC) 0.120 or so with a dremel/file. Some rounds have had some issues of hitting or hanging up (case mouth edge) on the lip if it's not lowered, that's been my experience. But it's a quick and painless fix, for a $15 mag (I use 10 rounders).
I use The ASC and duramags too, 3 Arc's. Only slight mod I've done is to lower the front lip by about (IIRC) 0.120 or so with a dremel/file. Some rounds have had some issues of hitting or hanging up (case mouth edge) on the lip if it's not lowered, that's been my experience. But it's a quick and painless fix, for a $15 mag (I use 10 rounders).
"Down the floor, out the door, Go Brandon Go!!!!!"