okiecat Wrote:Hi Montana, Just found your review of RifleSpeed block. I think mine is Odin. Have a Superlative too but havent tried it. Hand guard is only 1.4 or 1.5 ID. Anyway. Im going to order the RifleSpeed. I have a 12 Grendel also. And a 300Blk Pistol too. Can Always use one. Thought I read a 20 barrel could produce enough gas in bore to run the BCG
Make sure your hand guard will fit the Rifle Speed adj gas block..
Make sure you have the correct hand adjuster length when ordering..Read the instructions carefully so get exactly what you need..
The Rifle Speed requires a straight gas tube and some hand guards will not work, as they are designed for standard bent gas tubes..
I also use two adj springs to increase adjustment tension..I found using only one adj spring a little light and I prefer stronger force to turn when adjusting the gas, but you may differ..
The great thing about the Rifle Speed is the ability to use different length plungers to modify the amount of gas being regulated, the ease of maintenance and easy accessibility to the parts..It is a well designed adj gas block..
The gas block also comes pre-drilled if you want to pin the block to the barrel.. I pinned mine using the BRD Engineering Gas Block Jig..
https://www.youtube.com/watch?v=E2n5wrc7...oMx0Apd6Me
https://brdengineering.com/products/2aum...illing-jig
Rifle Speed has a company that will do it for you for about $40.00 if my memory serves, if you send them your barrel..