LRRPF52...
the back side of the lip was exactly where the case was being held onto...it was not doing it with the extractor off the bolt..but when installed on the bolt those corners were digging into the rim and trapping the case from ejecting....when i took the bolt out of the rifle and played with it under the big eye i could see exactly why this was happening...and i could make it happen....for sure the extractor was holding onto the rim
so i defanged the back side of the lips until they did not hold onto the rim...put it on the bolt, take it off...probably had it on and off the bolt 6-7 times....when i got it where i thought was good i polished it really well with a felt bob and some jewlers rouge
i also relieved the out board side of the radius just a touch....not sure if it needed that but i cleared it anyway...looked like the case was bumping there to and helping with the locking the case on the extractor thing...lol...not now....case comes off the extractor when it is on the bolt like greased lightening...lol.....oh sure ...lol
rainy and snowy today...but saturday it is supposed to be in the 20's....more testing if you please...making some more testing fodder today so i gots me plenty of boolets for saturday
so if this dont work out...fingers crossed...when i take the bolt out i will get a couple of pics for you to look at....i do plan on getting a couple more extractors from BFT just to have extras...i did order a bolt and a extractor kit from him the other day
also want to add BFT....i tried to answer you PM but it said your mailbox is full and i cant reply until you empty it some.....something about exceeding your limit
thanks guys
ocharry
the back side of the lip was exactly where the case was being held onto...it was not doing it with the extractor off the bolt..but when installed on the bolt those corners were digging into the rim and trapping the case from ejecting....when i took the bolt out of the rifle and played with it under the big eye i could see exactly why this was happening...and i could make it happen....for sure the extractor was holding onto the rim
so i defanged the back side of the lips until they did not hold onto the rim...put it on the bolt, take it off...probably had it on and off the bolt 6-7 times....when i got it where i thought was good i polished it really well with a felt bob and some jewlers rouge
i also relieved the out board side of the radius just a touch....not sure if it needed that but i cleared it anyway...looked like the case was bumping there to and helping with the locking the case on the extractor thing...lol...not now....case comes off the extractor when it is on the bolt like greased lightening...lol.....oh sure ...lol
rainy and snowy today...but saturday it is supposed to be in the 20's....more testing if you please...making some more testing fodder today so i gots me plenty of boolets for saturday
so if this dont work out...fingers crossed...when i take the bolt out i will get a couple of pics for you to look at....i do plan on getting a couple more extractors from BFT just to have extras...i did order a bolt and a extractor kit from him the other day
also want to add BFT....i tried to answer you PM but it said your mailbox is full and i cant reply until you empty it some.....something about exceeding your limit
thanks guys
ocharry