110 grain Hammer Hunter load data

[WestMOhunter]

I’ve recently played with Absolute Hammers, which differ from the Hunters in that the bullet engages the lands farther back (1st band) on the Absolutes. The claim is that they build less pressure, all other factors being equal. There is also a claimed higher potential for velocity. I have not completely verified the second claim, but have the first. My experience is with H322 and Benchmark. Both worked and produced fine (not exceptional) precision with little tinkering. I don’t have a bushing die, so next step is Lee FCD to play with neck tension and evaluate further. I will tell you I exceeded conventional max load in both powder/bullet weight combos without pressure. When I did hit pressure I was seeing ~2850-2875 depending on powder and charge. I’ve seen claims of 2900-3000, but I don’t see that happening in my rig. I intend to keep tinkering as I am a fan of no lead deer meat if velocities are high and range is close (250 or less for Grendel). If not, I’ll stick to a bonded. If I can get this bullet to be a 2850 fps tack-driver (without damaging brass/primer pockets) it will be my kids go-to for deer. I’ll report back once I get the Lee FCD. Thanks.

Edit: CCI450s, 20” AR platform, Nosler brass.

Also, the Absolutes require a faster burn rate powder than the usual. I have not tried AR-Comp or 8208 (my go-to’s), but I don’t expect them to be suitable for these bullets.