Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Minimal equipment required for loading 6.5 Grendel?
#61
Bonas Wrote:A pound of Ramshot Tac at Powder Valley is $65 shipped right now. That's $.28 per round of powder, not $.15. Academy sells Hornady Black ELDM for $1.50 a round. They had plenty sitting on the shelf the last time I was in there. Right now, Lucky Gunner will ship 200 plus rounds of Hornady Black ELDM to you at $2.20 per round, shipping included.

The Hornady Lock and Load Classic kit is $370. Dies are $53. A pound of powder is $70 shipped, assuming TAC works well in OP's barrel with the first kind of bullets he buys. 100 ELDM bullets are $58 shipped. The smallest box of primers will be about $135 shipped. The $100 worth of brass he's buying won't "cost" $.10 per round until after he's loaded all 100 cases 10 times. Then he's going to have to buy them again at $1.00 a round and work his way back down again from there. OP will still need calipers, a case gauge, lube pads and brushes, and some way to clean his cases. And that will give him a set up that's incredibly tedious to load with that he'll wind up either abandoning altogether or replacing most of because it's so slow. I've been there and done that. It's no way to save money.

OP asked about using a minimalist set up to save money and availability of ammo versus components. At least give him accurate information about the core costs. I just don't understand why so many people fudge reloading costs, particularly when giving advice to people considering starting out in it. There are plenty of good reasons to reload without being disingenuous about the costs.

Bonas:

Do you think I went through all of that trouble from costs I pulled out of my rear end?

I went to the Midway web site and pulled the figures from them.

BTW -- a pound of TAC at Midway is $36.00.

Now to the real issue.

You are accusing me of lying, attempting to deceive, and being disingenuous because I took an hour of my life to get the info for my post?

You have no clue as to my motivation for spending that amount of time to give the best info I could give without spending another three hours on the subject.

One thing to disagree with me. Another thing to accuse me of lying or attempting to deceive.

Accuse me of these things again and you are history.

And no, I won't argue with you about it.

LR-55
Reply


Messages In This Thread
Minimal equipment required for loading 6.5 Grendel? - by LR1955 - 02-22-2023, 02:03 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)