Should I drill out my gas port?
#6
Actually, I just realized something that may explain things. It turns out I may be very, very stupid...

The Superlative Arms adjustable gas block instructions say this:

Quote:CLICKS OF ADJUSTMENT:

0: CLOSED (NOT RECOMMEND TO FIRE CLOSED, YOU MAY SEIZE THE SCREW)
1-17: RESTRICTIVE MODE (NOT RECOMMEND, YOU MAY SEIZE THE SCREW)
18: FULLY OPEN, FULL PRESSURE (ACTING LIKE A NON-ADJUSTABLE GAS BLOCK)
20-48: BLEED OFF MODE (RECOMMENDED - UNSUPPRESSED / SUPPRESSED)

I opened mine up all the way to max (so 48 clicks), thinking that would give me maximum pressure. But looking at it again, I think I might be an idiot and that is actually maximum bleed off.

If I'm understanding it correctly, 1-17 lower gas pressure by restricting flow. 20-48 lower gas pressure by bleeding off gas. 18 is normal, full flow and what I should have it set at.

Does that make sense? Have I just been using the gas block improperly this whole time?!
Reply


Messages In This Thread
Should I drill out my gas port? - by montana - 02-08-2023, 10:53 PM
Should I drill out my gas port? - by montana - 02-09-2023, 12:15 AM
Should I drill out my gas port? - by TheSerialHobbyist - 02-09-2023, 01:07 AM
Should I drill out my gas port? - by montana - 02-09-2023, 01:42 AM
Should I drill out my gas port? - by montana - 02-09-2023, 03:42 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)