01-31-2023, 11:40 AM
PNWTargets Wrote:[ATTACH=CONFIG]19478[/ATTACH]
Solid members with solid info on this forum. Id like to add to the info on this site with what worked for me. 18 heavy fluted Faxon set up with full capacity E mags. I did need to bend up the mag feed (increased the bullet tip angle up in mag), to help the bullet feed to barrel. I did not polish the barrel extension feed but that was plan b. The 123 grain Hornady SST feeds the best and under one MOA. I run suppressed with OSS TI can, Sprinco red spring, SupArms adj gas block, CMC 2.5 lb trigger, and Leupold optics.
[ATTACH=CONFIG]19479[/ATTACH]
Is it possible for you to show a picture of exactly how or what you did to the mag?
I have one ASC mag that refuses to feed. The bolt does not strip a round from the mag no matter how I try to do it. I have 2 other ASC mags that feed perfectly and comparing the three mags side-by-side, I can't see any difference.
Thanks, R.