01-17-2023, 12:09 AM
I've fully committed to ditching my 18" Ballistic Advantage SPR Grendel barrel in lieu of one shorter and lighter. It has shot well for me but it's too heavy and long especially with a suppressor. I'm now trying to decide on a 14.5" pin and weld to replace it. Having a difficult time choosing between the SixFiveOutfitters and Six Sigma Lilja. Obviously, there are lots of good things to read about Liljas here and elsewhere, and from what I have gathered the SixFive barrels seem to be good to go. I'm not a bench rest shooter or anything of the sort but accuracy is pretty important. I probably won't shoot enough paper to know just how accurate the Lilja is but I like knowing the rifle has a lot of potential. I'm pretty much just using this rifle for hunting inside 350 yards max (possibly not even that far.) I've read that the higher-end barrels usually shoot well right out of the gate while the lower-end barrels take time to. One thing I like better about the SixFive barrel is the mid-length gas compared to the carbine length on the Lilja. Also, I couldn't find the weight for the 14.5" Lilja.
Also, anyone with a pin&weld feel free to voice your opinion or pros/cons. I know it's semi-permanent, so I'd like to get this right the first time. I don't want to sbr this lower but I'm wanting it to be handy with a suppressor. I know 12.5" would be ideal but that'll be for another time. 16" could still in the running but I'm selling myself on the 14.5"
Also, anyone with a pin&weld feel free to voice your opinion or pros/cons. I know it's semi-permanent, so I'd like to get this right the first time. I don't want to sbr this lower but I'm wanting it to be handy with a suppressor. I know 12.5" would be ideal but that'll be for another time. 16" could still in the running but I'm selling myself on the 14.5"