Klem Wrote:I'm with 52 on this - it's not that I am uncaring or ignorant about specs but find myself asking which ones matter. For me, I want the most reliable, accurate gun, in this type of gun. With this in mind some specs are more important than others. And in a machine of consumable parts that wear at different speeds, some parts and their specs are more important than others.
I was going to let this one go, but after some thought I decided not to. Specs were created for a reason and when advocating a cleaning method that is detrimental to such spec is beyond my reasoning when it is completely unnecessary. You also advocated reaming and polishing the barrels feed ramps while in the upper receiver, which removes the surface hardened anodized aluminum in the upper. You never remove the anodized portion of the upper's feed ramps, you do it right by removing the barrel from the upper.. It is not only detrimental to the upper, but once again it is also completely unnecessary..You and others can do as they wish with their rifles, but I won't play patsy while being gas lighted when I know better..https://www.youtube.com/watch?v=OHbJovLMuZk