Brass dents revisited

[TedBrewer5]

So I messed with both the 6.5 mag and the 6.8 mag. Used 400 grit wet dry paper to feed lips on both. The 6.5 was definitely not as bad offender as the 6.8 and only required slight feed lip adjustment. The 6.8 I had to do more work to do to get it to stop the denting. Both seems to be ok now but I am going to keep my eye on the 6.8 going forward. I also lowered to front edge of the magazine by 1/16 after observing that the 6.8 looked like the round might be
Contacting it