10-05-2022, 01:12 AM
Good point on questioning accuracy of my equipment. Its certainly possible there is error as its just a cheap digital caliper. Having said that, it measures very consistently and precision is to .0001. I would be surprised if its off by anywhere near .0050 but its possible, I suppose.
My BHW barrels are .125 so yes, Im aware of that concern. I also considered the history with JSE of having Wilsons chambered for both .125 and .136 bolts. Given that I have a .1410 deep bolt, I feel pretty confident the chamber was cut for a .136 bolt. A .1410 bolt with a .125 chambered barrel is gonna be a bigger issue than slight ejector swipe, I assume. I will stick a new in spec bolt in it and see if it heals up.
Thank you for the ideas.
My BHW barrels are .125 so yes, Im aware of that concern. I also considered the history with JSE of having Wilsons chambered for both .125 and .136 bolts. Given that I have a .1410 deep bolt, I feel pretty confident the chamber was cut for a .136 bolt. A .1410 bolt with a .125 chambered barrel is gonna be a bigger issue than slight ejector swipe, I assume. I will stick a new in spec bolt in it and see if it heals up.
Thank you for the ideas.