I had a partial case head separation using a 1.8oz buffer
#43
DeNinny Wrote:I would agree with that with the added provision that you stay under/at max pressure, which according to Hornady is 29.1 gr for the 123gr ELD-M.

A grain or two either side of SAAMI probably doesn't make a difference to the OOB danger. If the base of a case is unsupported then even a half-load (25K lbs) would blow a hole in brass.
Reply


Messages In This Thread
I had a partial case head separation using a 1.8oz buffer - by Klem - 09-24-2022, 06:02 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)