I had a partial case head separation using a 1.8oz buffer
#3
https://hodgdonreloading.com/accurate/accurate-2520r

Max charge was 29.5 / 29.6 grains

Something else happened if your case head opened up. This was an 80KPSI+ event (more like 120KPSI)! Wrong powder, wrong bullet, obstructed barrel, massive over-charge, something major happened. You don't need to simply drop your charge by a single grain.

Do you have any velocity measurements?

Re-weight your powder charges in your cases as you take them apart. Put the same powder back in your powder measure and re-weigh the charges.
Reply


Messages In This Thread
I had a partial case head separation using a 1.8oz buffer - by Happy2Shoot - 09-22-2022, 10:25 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)